ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing Red Hat Linux 9.0 Professional
3. Select the proper driver to install.
4. Follow the on-screen instructions to create the driver diskette.
NOTE: If the PC does not auto-start the Startup menu, start it by opening startup.htm, found
at the root level of the Startup CD-ROM.
Performing the Installation
1. Boot the server from the Red Hat 9.0 Professional Installation CD-ROM.
2. When you see the boot: prompt, enter
linux dd and press the Enter key.
a. When the Do you have a driver disk? window appears, select Yes and press
the Enter key.
b. Select fd0 for the driver disk source and press the Enter key.
c. Insert the ZCR driver diskette you created from the Startup CD-ROM.
d. Select OK and press the Enter key to load ZCR driver.
e. When the More Driver Disks? window appears, select NO and press the
Enter key to continue.
3. Select OK to test the CD media before the installation.
a. Select Test to start testing the CD-ROM.
b. Select OK after the media check.
c. Repeat steps a ~ b to test the other Red Hat Linux 9.0 Professional CD-
ROMs.
You can also select Skip to skip the test.
4. Press the Enter key to proceed to the Welcome to Red Hat Linux screen.
Continue with the standard Red Hat Linux installation as described in Installation
Settings of the “Section 1. Performing the Red Hat Linux Installation” section
earlier in this chapter.
HP ProLiant ML150 Server NOS Installation and Software Guide 4-9
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: e-ch4 Installing Red Hat Linux 9.0 Professional.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 3:52 PM