ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing Red Hat Linux 9.0 Professional
Additional CDs
If you have any of the CDs, you can install packages from then by inserting the CD
and clicking the appropriate button.
Click Forward on the Additional CDs screen. You will then be brought to the
Finish Setup screen.
Finish Setup
Your system is now set up and ready to use. Please click Forward in the GUI menu
to continue. Then it will enter the login prompt.
Section 2. MSHD Installation
Please refer to “Installing MSHD” in Chapter 13 for the detailed instructions on
installing MSHD from the Startup CD-ROM.
Section 3. Installing the ZCR Driver
If an optional ZCR card is installed in your server, an appropriate driver is required
for the ZCR controller to operate properly. You can create the driver diskette from
the HP Startup CD-ROM for easy installation.
Creating the Driver Diskette
1. Insert one blank, formatted 3.5” diskette into the flexible diskette drive of a PC
running Microsoft Windows.
2. Insert the HP Startup CD-ROM into the CD-ROM drive of the above PC and
click HP ProLiant ML150 drivers on the Startup menu.
4-8 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: e-ch4 Installing Red Hat Linux 9.0 Professional.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 3:52 PM