ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing Red Hat Linux 9.0 Professional
Post Installation Configuration
Boot Diskette Creation
It is recommended to create a boot diskette. If you create a diskette and for some
reason your system will not boot on its own, you may be able to boot it from the
diskette and try to determine what went wrong. The creation of this diskette is
optional.
If you choose to create the diskette, insert a diskette into the flexible diskette drive,
select Yes, I would like to create a boot disk and click Next.
Otherwise select No, I do not want to create a boot disk and click Next.
Graphical Interface Configuration
In most cases, the installer will have automatically detected your video card
configuration by this step. Simply click Next to continue.
Monitor Configuration
If the system is connected to a switch box, the installer most likely will not be able to
auto probe your monitor type. It is usually safe to just leave it with the default
settings of Unprobed Monitor, or if it detects your monitor type, to leave it with
that. Click Next.
Customize Graphics Configuration
If the installer was able to probe your video card successfully, it will most likely pick
a good resolution for your system based on the information gathered. In most cases, it
will be safe to go with the default.
You will probably want to click Test Setting before clicking Next, especially if you
have graphical selected. If testing the settings works, you may wish to boot in
graphical mode. If you do not want to be placed in graphical mode after boot, then
select Text. Click Next to continue.
4-6 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: e-ch4 Installing Red Hat Linux 9.0 Professional.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 3:52 PM