ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing Microsoft Windows Server 2003 and Small Business Server 2003
3. Enter an appropriate IP address and its subnet mask (if necessary).
4. Click OK then Close to exit the Local Area Connection Properties window.
Phase 2 – Attaching Clients to Network and Test Network Link
1. Create shares: create a folder on the HP server hard drive then share it (by right–
clicking the folder and selecting Sharing and Security).
2. Create users using the Windows 2003 Computer Management utility: Start > All
Programs > Administrative Tools > Computer Management > System Tools
> Local Users and Groups.
For Windows Server 2003: Action > New User.
For Windows Small Business Server 2003: Users > Action > New User.
3. Connect clients PC to the network that the HP server operates on.
4. Open a command prompt window to verify the TCP/IP configuration and enter
the command:
ipconfig /all
5. To verify the server and clients can communicate properly:
a. From one of the clients, open a command prompt and type:
ping computername
where computername is the server name you entered during the Windows
installation. You should get four replies from the new server. If there is a link
problem, it must be fixed before going any further.
You may test the link further by doing a ping between two clients. At the
same command prompt, type:
ping other_client_IPaddress
Where other_client_IPaddress is the IP address of another client PC on this
network.
You should get four replies from the second client.
b. Copy files back and forth from the clients to the server.
HP ProLiant ML150 Server NOS Installation and Software Guide 3-7
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: d-ch3 Installing Microsoft Windows Server 2003 and Small Business Server 2003.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 3:51 PM