ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing Microsoft Windows 2000 Server and Small Business Server 2000
1. Insert the Windows 2000 CD-ROM and start the reboot sequence.
2. Press any key when prompted to start booting from the Windows 2000 CD-
ROM.
3. Press the F10 key on the Welcome to Setup screen.
NOTE: This is an undocumented option. The bottom of the display is asking you to press the
Enter, R, or F3 key.
4. The system will display a menu asking to select the instance of the NOS you
want to boot. For example:
1: C:\WINNT
5. Type 1 and then press the Enter key.
6. Type the Administrator password when prompted.
7. At the command prompt, type
help and proceed to achieve your objective.
8. Type
exit when done troubleshooting.
Installing RC
1. Insert Windows 2000 CD-ROM. If CD-ROM auto-start is enabled, click
exit to
close the applet.
2. Open a command prompt, and type
D:\I386\WINNT32 /CMDCONS (Where D:
is the CD-ROM drive letter).
3. Follow the on-screen instructions to complete the RC installation.
Booting RC
1. Shutdown and restart the system.
2. Select Windows 2000, Recovery Console from the boot menu.
3. The system will display a menu asking to select the instance of the NOS you
want to boot. For example it displays:
1: C:\WINNT
4. Type 1 and then press the Enter key.
5. Type the Administrator password when prompted.
2-18 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: c-ch2 Installing Microsoft Windows 2000 Server and Small Business Server 2000.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 3:49 PM