ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing Microsoft Windows 2000 Server and Small Business Server 2000
3. Verify if the installed drivers are digitally signed.
a. In the Device Manager, select the device (e.g. Adaptec AIC-7902 based Ultra
320 SCSI) that you want to verify.
b. Right click Properties > Driver.
c. Locate the Digital Signer:. If the driver of that device is digitally signed then
it will display MS Windows 2000 Publisher or Microsoft Windows
Hardware Compatibility Publisher. If the driver of the device is not
digitally signed, we recommend that you check the HP Website
www.hp.com
to install the latest driver package.
4. Exit the Device Manager, System Properties and Control Panel applications.
5. Check the event viewer to be sure that there are no errors in the log. Click Start
> Programs > Administrative tools > Event viewer.
NOTE: Windows 2000 Event Viewer may have recorded network errors because your
network is not configured yet. Please disregard these errors.
6. Exit Event Viewer.
Phase 2 – Initializing Hard Disk Drive
To manage your different drives and partitions:
1. Click Start > Programs > Administrative Tools > Disk Administrator.
2. Click OK to proceed when notified you have a new hard disk to configure.
3. Select available hard disk space on the graphic and use menus to create
additional partitions.
4. Exit the Disk Administrator.
5. To complete the formatting of new partitions, open My Computer, then right
click the new unformatted partition(s) and select format.
HP ProLiant ML150 Server NOS Installation and Software Guide 2-7
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: c-ch2 Installing Microsoft Windows 2000 Server and Small Business Server 2000.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 3:49 PM