ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing Microsoft Windows 2000 Server and Small Business Server 2000
3. Click Start > Settings > Control Panel > System > Hardware > Device
Manager.
4. Update the LAN driver for the Intel® PRO/1000 M T Port Network
Connection by browsing for HP Startup CD-ROM\drivers\w2k_LAN.
5. Update the SCSI Backplane driver for the SDR GEM318P SCSI Processor
Device by browsing for HP Startup CD-ROM\drivers\w2k_gem318.
6. Exit all open windows and restart the server in order to initialize the server
properly.
Phase 3 – Installing Window s 2000 Recovery Console
Please refer to Tip#4 in the Troubleshooting section.
Section 4. Configuring the System
Phase 1 – Performi ng Hardware Status Check
In this section you will run Windows 2000 Device Manager tool to identify any
issues with the installed devices or resource conflicts.
1. Click Start > Settings > Control Panel > System > Hardware > Device
Manager.
2. Verify that no devices have either a yellow band (!) or question mark (?) symbol
next to it.
— Yellow (!) means that there is a resource issue with the device.
— Question (?) means that the device is unknown.
If (!) or (?) symbols are reported then double click on each of the devices with (!)
or (?). Use the Device Status message for troubleshooting. Or, if a printer is
available, use the
View, Print from the menu to get a report.
2-6 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: c-ch2 Installing Microsoft Windows 2000 Server and Small Business Server 2000.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 3:49 PM