ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing Microsoft Windows 2000 Server and Small Business Server 2000
High Level Process Flow
1. Creating the driver diskette using the HP Startup CD-ROM
2. Performing Windows 2000 Server installation
3. Completing the installation (Microsoft Service Pack, HP drivers, Recovery
Console)
4. Configuring the system
5. Configuring the network
6. Installing MSM
7. Installing the ZCR driver
8. Troubleshooting
9. On-line information and software sources
Section 1. Creating the Driver Diskette
1. Insert one blank, formatted 3.5” diskette into the flexible diskette drive of a PC
running Microsoft Windows.
2. Insert the HP Startup CD-ROM into the CD-ROM drive of the above PC and
follow the on-screen instructions to create the Windows 2000 SCSI driver
diskette (HP disk W2K SCSI).
NOTE: If the PC does not auto-start the Startup menu, start it by opening startup.htm, found
at the root level of the Startup CD-ROM.
Section 2. Performing the Windows 2000 Installation
NOTE: Though you may install Windows 2000 from setup diskettes or directly from the
Windows 2000 CD-ROM, we recommend you use the second method because it is faster.
1. Boot the new server from the Windows 2000 CD-ROM.
2. You will see a message that reads, Setup is inspecting your hardware
configuration
. Then the setup screen will be displayed.
2-2 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: c-ch2 Installing Microsoft Windows 2000 Server and Small Business Server 2000.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 3:49 PM