ProLiant ML150 Server NOS - (English) Installation and Software Guide

Management and Diagnostics Tools
13-6 HP ProLiant ML150 Server NOS Installation and Software Guide
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: n-ch13 Management and Diagnostics Tools.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 4:15 PM
HP Server Diagnostics for Windows
NOTE: The HP Server Diagnostics for Windows is available for Windows 2000 and 2003 only.
The users may use the HP Server Diagnostics for Windows to examine the server for
possible hardware problems.
Installing the HP Server Diagnostics for Windows
1. Insert the HP Startup CD-ROM in the CD-ROM drive of the HP ProLiant
ML150 server running Microsoft Windows 2000 or 2003. The HP Startup CD-
ROM should start automatically.
NOTE: If the server does not auto-start the Startup menu, start it by opening startup.htm,
found at the root level of the HP Startup CD-ROM.
2. Click Installing/Updating Diagnostics for Windows 2000 on the screen.
3. Click Click here on the screen to install the HP Server Diagnostics for Windows.
4. On the File Download window, click Run this program from its current
location and click OK to continue.
5. On the Security Warning windows, click YES to continue.
6. Follow the onscreen instructions to unzip the files to the hard drive.
7. On the welcome screen, click Next.
8. When the HP Server Diagnostics for Windows is installed successfully, click
Finish to complete the installation.
Once installed, you can start the Diagnostics software by clicking Start > Settings >
Control Panel > Diagnostics for Windows. You can then perform remote
management.