ProLiant ML150 Server NOS - (English) Installation and Software Guide

Management and Diagnostics Tools
HP ML150 Server Health Driver (MSHD)
The HP ProLiant ML150 Server Health Driver (MSHD) is a Linux program that
provides the critical server health functions.
Installing MSHD
NOTE: The lm-sensors driver (preinstalled in Linux systems by default) is used to access the
reading data of the system fans. If you re-compile the kernel source, MSHD may not be
activated. If this happens, make sure the lm-sensors driver of the kernel is enabled.
1. Insert the HP Startup CD-ROM in the CD-ROM drive of the HP ProLiant
ML150 server running Red Hat Linux 9.0 Professional, United Linux 1.0, Red
Flag Linux 4.0 Advanced Server, or Turbolinux 8 Server.
2. Run the terminal program. When the window displays, follow the instructions to
install MSHD:
a. Mount the CD-ROM.
# mount /dev/hda /mnt
b. Follow the instructions to copy the source package of MSHD 1.x, “mshd-
1.0.i386.rh.rpm” to a Linux PC.
# cp /mnt/Utility/Mshd/V1.0/mshd-1.0.i386.rh.rpm /tmp
(for Red Hat Linux 9.0 Professional, Red Flag Linux 4.0 Advanced Server,
and Turbolinux 8 Server)
# cp /mnt/Utility/Mshd/V1.0/mshd-1.0.i386.un.rpm /tmp
(for United Linux 1.0 – SCO Linux 4, SuSE Linux Enterprise Server 8, and
turbolinux enterprise server 8)
c. After copying the source package, please install MSHD.
# rpm –i /tmp/mshd-1.0.i386.rh.rpm
(for Red Hat Linux 9.0 Professional, Red Flag Linux 4.0 Advanced Server,
and Turbolinux 8 Server)
HP ProLiant ML150 Server NOS Installation and Software Guide 13-3
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: n-ch13 Management and Diagnostics Tools.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 4:15 PM