ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing SCO OpenServer 5.0.7
Section 3. Enabling the Second Processor
If a second processor is installed in your server, then you must install the specified
software to enable this second processor in SCO OpenServer 5.0.7.
1. Turn on the server and log in the system as “root.”
2. Insert the Base Operating System installation CD-ROM.
3. Run the terminal program. When the window displays, mount the CD-ROM.
# mount /dev/cd0 /mnt
4. Start the Software Manager program by typing:
# custom
5. Select the Software tab from the menu, and press the Enter key.
6. Select the Install New item, and press the Enter key.
7. Select From scosysv, then Continue, and press the Enter key.
8. Select CD-ROM Drive 0, then Continue, and press the Enter key.
9. Select SCO Symmetrical Multiprocessing (ver 1.1.1Hw) to install.
10. Enter the license number, license code and license data, and press the Enter key.
11. After the installation, you can find the SCO Symmetrical Multiprocessing
(ver 1.1.1Hw) software from the menu.
12. Exit the Software Manager program and reboot the server.
The second processor is now ready to use in your server.
Section 4. MSHD-O Installation
Please refer to “Installing MSHD-O” in Chapter 13 for the detailed instructions on
installing MSHD-O from the Startup CD-ROM.
HP ProLiant ML150 Server NOS Installation and Software Guide 12-7
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: m-ch12 Installing SCO OpenServer 5.0.7.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 4:33 PM