ProLiant ML150 Server NOS - (English) Installation and Software Guide

Installing SCO OpenServer 5.0.7
Install the Network Driver
1. Insert the Startup CD-ROM and mount the CD-ROM. For example:
# mount /dev/cd0 /mnt
As the system is mounting a read-only CD-ROM, an error message may appear.
Click Close to continue.
2. Make sure that no other users log on the system, and all user applications are
closed.
3. Copy the eeG.vol file to any directory, like /tmp, on the SCO system, and then
rename the file as VOL.000.000. Use the
chmod command to make it a read-
only file.
# cp /mnt/drivers/osr507l/eeG.vol /tmp/VOL.000.000
# chmod 444 /tmp/VOL.000.000
4. If there is an older version of the eeG driver on the system, you must first remove
it:
a. Run
netconfig.
b. Remove all drivers of the “Intel PRO/1000...” adapter(s).
c. Exit netconfig and select not to relink the kernel.
d. Run
Custom and remove the previous version of the Intel(R) PRO/1000
Network drivers.
5. To install the new driver:
a. Run
custom.
b. On the pop-up window, click Software > Install New.
c. Select From scosysv and click Continue.
d. Select Media Images for the installation media, and click Continue.
HP ProLiant ML150 Server NOS Installation and Software Guide 12-5
HP CONFIDENTIAL
Writer: Pauline Tsai File Name: m-ch12 Installing SCO OpenServer 5.0.7.doc
Codename: Stone Soup Part Number: 343330-003 Last Saved On: 1/7/04 4:33 PM