ProLiant ML150 Server - (English) Installation Sheet

Installing the PCI Accessory Board
Installing the Power Supply
Installing Memory
CAUTION Use only PC2100 266 MHz registered, ECC,
DDR DIMMs.
WARNING DIMMs can be damaged by improper handling.
Always use an anti-static wrist strap and
grounding mat, and discharge static electricity
before touching DIMMs.
Key
Notch
DIMM Slot
Slot 1
Slot 2*
Slot 3
Slot 4
Slot 5
Retaining Latches
0
1
2
3
4
5
1.
2.
3.
* Supports Zero-Channel RAID (ZCR) on green slot (Slot 2).
Installing a Second Processor
(continued)
Installing a Second Processor
WARNING To avoid pin damage, align pin 1 on the
processor with pin 1 on the processor socket.
WARNING To avoid overheating and damage to the
processor, ensure the heatsink sits squarely on
the processor.
For additional documentation, refer to your HP ProLiant ML150 Server
Startup CD-ROM. You can also access additional information and
documentation from HP's external website, either by connecting
directly or through your Startup CD-ROM.
Obtaining Additional Documentation
Processor Socket
ZIF Lever
Pin 1 Marker
Locking Lever
Heatsink Mounting Bracket
By default, the server searches for boot devices in this order:
1. Flexible disk drive
2. IDE CD-ROM drive
3. Embedded SCSI B channel (SCSI drives)
4. Embedded LAN
Boot Priority