ProLiant ML150 Server - (English) Installation Sheet

Installation Sheet
HP ProLiant ML150 Server
Opening the HP Server
Familiarizing Yourself
Installing Mass Storage Devices
CAUTION The keyboard and mouse PS/2 ports are not
interchangeable. If a device is attached to the
incorrect port, the boot process will not complete.
WARNING Drives can be damaged by static electricity. Before
handling drives, touch an unpainted metal surface
to discharge static electricity.
Flexible Disk Drive
Flexible Disk Drive
Eject Button
Eject Button
CD-ROM Drive
Key Lock
LAN Activity LED
Disk Activity LED
Activity LED
Activity LED
Mouse and
Keyboard
USBs
Parallel
Serial
LAN
Video SVGA
Power Button
Power LED
Hot Swap Key Lock
Hot Swap Drives
CD-ROM Drive
Vents
Keys
Mouse
Keyboard
USB (2)
Serial
Parallel
LAN
Video SVGA
Processor 1 (CPU 1)
8-Pin CPU
Power
Connector
Wake-On-LAN
Battery
Primary IDE
FDD
SCSI B SCSI A
CPU 1 Fan
CPU 2 Fan
Activity/Link
Header
Front Panel
Connector
System Fan
(Option)
System Fan
(Option)
Power
Connector
Processor 2
(CPU 2)
L
R
L
Setting up the HP ProLiant ML150 Server
Power
The information contained in this document is subject to change
without notice.
Hewlett-Packard makes no warranty of any kind with regard to this
material, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
Hewlett-Packard shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
Hewlett-Packard assumes no responsibility for the use or reliability
of its software on equipment that is not furnished by
Hewlett-Packard.
This document contains proprietary information that is protected by
copyright. All rights are reserved. No part of this document may be
photocopied, reproduced, or translated to another language without
the prior written consent of Hewlett-Packard Company.
Reader's Comments
HP welcomes your comments on this guide.
Please send your comments and suggestions by
email to [e-mail].
Copyright 2004, Hewlett-Packard Development Company, L.P.
January 2004
Printed in China Printed on recycled paper
Notice
Audience Assumptions
This guide is for the person who installs, administers, and troubleshoots LAN servers. Hewlett-Packard
Company assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards
in products with hazardous energy levels. The instructions in this document are provided in greater detail in the
HP ProLiant ML150 Server Operations and Maintenance Guide.
Configuring the HP Server
1. Connect all peripherals:
Connect the keyboard, mouse, monitor and applicable UPS to the HP server.
2. Determine the server's BIOS version:
Power on the server.
Press the Tab key at the HP logo screen.
Note the HP server's BIOS version during the POST boot-up.
Verify the HP server's BIOS version against the latest BIOS version listed on HP's website for this
server at http://www.hp.com.
If you do not have the latest BIOS, update the BIOS now. Refer to the HP ProLiant ML150 Server
Operations and Maintenance Guide for instructions.
3. Refer to the HP Startup CD-ROM:
Use this CD-ROM for updated information about your HP server, and as a reference for any
additional information not provided in this Installation Sheet.
4. Install the desired Network Operating System (NOS):
Refer to the HP ProLiant ML150 Server NOS Installation and Software Guide for instructions on
installing the NOS.
NOTE Before opening the server, use the key attached
to the back to unlock the server door.
343327- 002