Technologies for HP ProLiant 100-series G5 (Generation 5) servers, 2nd edition

ProLiant DL100-series servers
ProLiant DL100-series servers use 1U or 2U rack-mountable chassis that are well-suited for medium-
density environments. Table 5 lists key components of the DL100-series servers.
Table 5. Key components of ProLiant DL100-series servers
DL120 G5 DL160 G5 DL165 G5 DL180 G5 DL185 G5
Form factor 1U 1U 1U 2U 2U
Processor
support
1 Intel
Xeon, Core2,
Pentium, or
Celeron
processor
2 Intel
Xeon 5400
processors
2 AMD
Opteron 2300
processors
2 Intel
Xeon 5400
processors
2 AMD
Opteron 2200
processors
Chipset Intel 3200 Intel 5400
ServerWorks
HT2100
& HT1000
Intel 5100
ServerWorks
HT2100
& HT1000
Memory
Unbuffered
PC2-6400
(DDR2-800)
Fully-buffered
PC2-5300
(DDR2-667)
Registered
PC2-5300
(DDR2-667)
Registered
PC2-5300
(DDR2-667)
Registered
PC2-5300
(DDR2-667)
Max. memory 8 GB 32 GB 32 GB 16 GB 32 GB
Max. number
of hard drives
2
3.5” SATA or
SAS drives
4
3.5” SATA or
SAS drives
4
3.5” SATA or
SAS drives
12
3.5” SATA or
SAS drives
14
3.5” SATA or
SAS drives
I/O slots:
Standard
Optional
1 PCIe x8 [1,5]
1 PCIe x4 [2,5]
2 PCIe x16 [1,6]
1 PCIe x16 [1,5]
1 PCIe x4 [2,5]
2 PCI-X 64-bit
2 PCIe x4 [1,5]
1 PCIe x8 [2,6]
2 PCI-X 64-bit
2 PCIe x8 [1]
1 PCIe x4 [2,5,6]
2 PCI-X 64-bit
USB ports:
Standard
Optional
2 front, 2 rear
1 internal
2 front, 2 rear
1 internal
2 front, 2 rear,
1 internal
2 front, 2 rear
1 internal
2 front, 2 rear
1 internal
Disk controller:
Non-hot plug
Hot-plug
SATA controller
[3]
SAS HBA [4]
SATA controller
[3]
SAS HBA [4]
SATA controller
[3]
SAS HBA [4]
SATA controller
[3]
SAS HBA [4]
SATA controller
[4]
SAS HBA [4]
Network
adapter
Embedded
NC105i PCIe
GbE adapters
2 embedded
NC105i PCIe
GbE adapters
1 embedded
NC7782 PCI
GbE adapters
1 embedded
NC7781 PCI
GbE adapters
NC326i dual-port
PCIe
GbE adapter
Management
IPMI 2.0,
SMASH CLP
support,
LO100i
(standard)
IPMI 2.0,
SMASH CLP
support,
LO100i
(standard)
IPMI 2.0,
SMASH CLP
support,
LO100i
(standard)
IPMI 2.0,
SMASH CLP
support
LO100c
(optional)
IPMI 2.0,
SMASH CLP
support
LO100i (standard)
NOTES:
[1] Full-length, full-height slot
[2] Half-length, low-profile slot
[3] Embedded on non-hot plug systems
[4] PCIe card
[5] x8 PCIe connector
[6] One slot populated with SAS HBA on hot-plug configurations
13