Intel Matrix Storage Manager User's Manual

Unattended Installation Under Windows* XP

9 Unattended Installation

Under Windows* XP

To install the Intel® Matrix Storage Manager as outlined in the Microsoft* document

"Deployment Guide Automating Windows NT Setup," use the supplied TXTSETUP.OEM file

included in the application package and insert the lines below into the UNATTEND.TXT file.

This method is available for Windows* XP.

First, determine if your system contains a 32-bit or 64-bit processor.

Then, extract the IAAHCI.CAT, IAACHI.INF, IASTOR.CAT, IASTOR.INF, IASTOR.SYS, and

TXTSETUP.OEM files from the compressed .CAB file. To extract these files, run

'C:\IATA5X.EXE -A -A -PC:\<path>' as described in the ‘Advanced Installation Instructions’

section of the README.TXT. If the system has a 32-bit processor, the files will be located in the

Drivers folder; if the system has a 64-bit processor, the files will be located in the Drivers64

folder.

Note: This same procedure can be used for systems with the following controller hubs by

replacing the text within the quotation marks:

x Intel® 82801ER SATA RAID Controller

x Intel® 6300ESB SATA RAID Controller

x Intel® 82801FR SATA RAID Controller

x Intel® 82801FR SATA AHCI Controller

x Intel® 82801FBM SATA AHCI Controller

x Intel® 82801GBM SATA AHCI Controller

x Intel® 82801GHM SATA RAID Controller

x Intel® 631xESB/632xESB SATA RAID Controller

x Intel® 631xESB/632xESB SATA AHCI Controller

Systems Configured for RAID Mode:

// Insert the lines below into the UNATTEND.TXT file

[MassStorageDrivers]

"Intel(R) 82801GR/GH SATA RAID Controller" = OEM

[OEMBootFiles]

iaStor.inf

iaStor.sys

56 User's Manual