ProLiant ML110 Generation 2 Server Maintenance and Service Guide

Index
drive bay configuration
battery 2-34
HDD cage 2-18
ESD damage prevention 2-2
IDE CD-ROM drive 2-14
expansion cards 2-32
optional media device 2-16
front bezel 2-7
overview 2-10
HDD cage 2-18
hot-plug SATA drive 2-23
IDE CD-ROM drive 2-14
E
memory 2-30
EEPROM
non-hot-plug SATA drive 2-21
location 4-5
non-hot-plug SCSI drive 2-20
PhoenixBIOS software 3-1
optional media device 2-16
electric shock
post-installation procedures 2-4
symbol 2-2, 2-3
power supply unit 2-36
warning 2-2
pre-installation procedures 2-3
Electrically Erasable Programmable Read-Only
Memory See EEPROM
processor 2-25
symbols in equipment 2-2
electrostatic discharge See ESD
system fan 2-38
environmental specifications
tools 2-1
acoustic emissions 5-5
hardware monitoring
altitude 5-5
onboard controller 5-2
relative humidity 5-4
pre-failure threshold levels 3-5
temperature 5-4
system health indicator 4-9
thermal output 5-5
hardware protection 3-13
ESCD
hardware specifications
clearing configuration data 3-5
core logic chipset 5-2
definition 3-5
default media storage 5-2
ESD
hardware monitoring controller 5-2
damage precautions 2-2
I/O ports 5-2
work area recommendations 2-2
I/O subsystem 5-2
exploded view
LAN controller 5-2
mechanical components 1-2
memory 5-2
system components 1-3
optional media storage 5-2
Extended System Configuration Data See ESCD
power supply unit 5-3
processor 5-2
F
processor socket 5-2
super I/O chipset 5-2
feet, part number 1-2
system management 5-3
firmware hub protection switch 4-7
thermal solution 5-3
front bezel
VGA controller 5-2
part number 1-2
hazardous conditions See symbols on equipment
reinstalling 2-8
hazardous energy circuits symbol 2-2
removing 2-7
HDD activity indicator
front panel 4-1
hot-plug SATA 4-10
front panel board cable assembly, part number 1-4
SCSI/IDE/non-hot-plug SATA 4-9
full-height drive bay release lever, part number 1-2
HDD cage
installing, hot-plug 2-19
G
installing, non-hot-plug 2-18
part numbers 1-2
General Help window 3-4
removing, hot-plug 2-25
removing, non-hot-plug SATA 2-21
H
removing, non-hot-plug SCSI 2-20
heatsink-cooling fan See HSF
hard disk drive cage See HDD cage
hard disk drive, locking 3-13
hardware configuration
access panel 2-5
Index-2 HP ProLiant ML110 Generation 2 Server Maintenance and Service Guide