HP ProLiant DL380 G5 High Availability Storage Server installation instructions (5697-7748, November 2008)

2. Double-click SETUP.EXE and follow the on-screen instructions
NOTE:
Accept the unsigned driver on the dialog box that appears beneath the MPIO installer dialog
box.
3. When prompted at the end of the installation wizard, select Yes, I want to restart my computer
now and click Finish.
4. Repeat the preceding steps for MPIO Driver installation on Server 2.
5. When prompted at the end of the installation wizard on Server 2, select No, I want to restart my
computer later and click Finish.
6. Shut down Server 2 completely by clicking Start > Shut Down and then clicking OK.
NOTE:
If you are accessing Server 2 through iLO 2, the Integrated Remote Console tab remains
visible during shut down. You can use the Integrated Remote Console tab Power button and
menu options to power the server back on at a later time during the cluster installation
process.
7. After Server 1 restarts, confirm the MPIO installation:
a. Log in to Server 1.
b. On the Server 1 desktop, click Start > Programs > Hewlett-Packard > MSA2000 > MPIO
Configuration.
c. At the command prompt, type dev.
d. Confirm that the device is listed, there are 2 paths, and that the policy is RoundRobin.
e. Close the command prompt window.
NOTE:
The default MPIO policy is RoundRobin. Other policies are available and are described in
the README.TXT file in the installation path listed above.
Initialize and format the Quorum disk
1. On the Server 1 desktop, right-click My Computer and select Manage.
2. In the console tree, click Disk Management.
NOTE:
The Initialize and Convert Wizard may be displayed. If so, click Cancel to close it.
HP ProLiant DL380 G5 High Availability Storage Server 23