HP ProLiant DL380 G5 High Availability Storage Server installation instructions (5697-7748, November 2008)

15. Select the Use the following IP address radio button and enter the Server 1 public static IP address,
Subnet mask, Default gateway, and Preferred DNS server as assigned by your network
administrator. Refer to your network configuration information as identified earlier.
Figure 10 Setting the public connection static IP address
16. Click Advanced, select the DNS tab, and uncheck the Register this connection's addresses in DNS
box.
17. Click OK twice and then click Close to dismiss the Connection Properties dialog box.
The Server 1 public static IP address is now set.
18. Repeat the preceding steps on Server 2, setting both the private network static IP address and
public-facing static IP address. For the Server 2 private network static IP address settings, enter
the following configuration information:
• IP address: 10.24.3.253
• Subnet mask: 255.255.255.0
For the Server 2 public network IP address settings, enter the Server 2 public static IP address,
Subnet mask, Default gateway, and Preferred DNS server as assigned by your network
administrator.
Join both storage servers to the domain
1. On the Server 1 desktop, right-click My Computer and select Properties.
Setting up an active/passive cluster18