Compaq ProLiant DL760 Servers Maintenance and Service Guide

2-14 Compaq ProLiant DL760 Servers Maintenance and Service Guide
Integrated Management Display
To remove the Integrated Management Display (IMD):
1. Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2. Remove the bezel. See “Media Module Bezel” earlier in this chapter.
3. Remove the media module. See “Removing the Media Module” earlier in this chapter.
4. Disconnect the IMD cable from the media backplane board . See “Media Module Cable
Routing Diagram.”
1
Figure 2-9. Removing the IMD cable