ProLiant DL760 Generation 2 Server Maintenance and Service Guide

I/O Module Removal and Replacement Procedures
11-slot Hot-Plug Basket
To remove the 11-slot hot-plug basket:
1. Power down the server. Refer to “Pow ering Down the Server” in Chapter 2.
2. Open the I/O lid. Refer to “I/O Lid” in Chapter 3.
3. Remove all installed expansion boards in slots 1 through 11. Refer to “Non-Hot Plug
Expansion Boards” in this chapter.
4. Open the lever next to the array enabler board (1) and remove the board (2).
Figure 6-21: Removing the array enabler board
6-22 HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide