ProLiant DL760 Generation 2 Server Maintenance and Service Guide

Service Preparation
7. Watch for memory system initialization. Memory system initializes as the memory
cartridge power LEDs on all five memory cartridges begin blinking. After the memory
system is initialized, all memory cartridges power LEDs will illuminate solid.
8. The server begins the Power-On Self-Test (POST) sequence. The Integrated Management
Display (IMD) displays each step of the POST sequence.
Power-On Self-Test
As the POST process continues during server power-up:
1. Check for the IMD messages about the following:
a. Server name
b. LCD firmware
c. System initialization
d. PCI auto configuration
e. Video
f. Processors
2. Check the IMD video initialization message. If there is a monitor connected, refer to the
HP initialization screen.
3. Check the IMD memory test message. The monitor displays the memory initialization,
memory detected, and redundant memory.
4. Check the IMD processors message. The monitor displays the number, speed, and cache
size of the processors.
5. Check for IMD messages about the following:
a. Diskette drive
b. Option ROM
c. SCSI devices
HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide 2-11