ProLiant DL740 Server Maintenance and Service Guide
Table Of Contents
- HP ProLiant DL740 Server Maintenance and Service Guide
- Notice
- Contents
- About This Guide
- Chapter 1: Illustrated Parts Catalog
- Chapter 2: Service Preparation
- Chapter 3: Chassis Components Removal and Replacement Procedures
- Chapter 4: Host Module Removal and Replacement Procedures
- Chapter 5: Power and Media Module Removal and Replacement Procedures
- Chapter 6: Diagnostic Tools
- Chapter 7: Connectors, Switches, and LED Indicators
- Connectors
- System Board
- Switches
- LED Indicators
- System Power LED Switch
- Unit Identification LED Switches (Front and Rear)
- System Interconnect LED Indicators
- System Attention LED Indicators
- System Activity LED Indicators
- Hot-Plug SCSI Hard Drive LED Indicators
- Power Supply LED Indicators
- Hot-Plug Fan LED Indicators
- PCI Hot Plug LED Indicators
- Memory Cartridge LED Indicators
- DIMM Status LED Indicators
- Chapter 8: Physical, Operating, and Performance Specifications
- Index
Power and Media Module Removal and Replacement Procedures
Removing the DVD/CD-ROM Drive
The half-height universal media bay supports hot-pluggable IDE devices and ships standard
with a DVD-ROM drive. The bay also supports other removable media devices, such as a
CD-ROM drive.
1. Locate the DVD drive on the front of the server in the universal media bay.
2. The universal media bay ejector button is recessed. Use a tool such as a key, screwdriver,
or the provided Torx tool to push the drive ejector button to release the drive (1).
3. Slide the drive out of the module (2).
Figure 5-10: Removing a drive from the universal media bay
HP ProLiant DL740 Server Maintenance and Service Guide 5-13
HP CONFIDENTIAL Codename: Jethro Part Number: 270853-004 Last Saved On: 2/10/04 3:51 PM