ProLiant DL740 Server Maintenance and Service Guide
Table Of Contents
- HP ProLiant DL740 Server Maintenance and Service Guide
- Notice
- Contents
- About This Guide
- Chapter 1: Illustrated Parts Catalog
- Chapter 2: Service Preparation
- Chapter 3: Chassis Components Removal and Replacement Procedures
- Chapter 4: Host Module Removal and Replacement Procedures
- Chapter 5: Power and Media Module Removal and Replacement Procedures
- Chapter 6: Diagnostic Tools
- Chapter 7: Connectors, Switches, and LED Indicators
- Connectors
- System Board
- Switches
- LED Indicators
- System Power LED Switch
- Unit Identification LED Switches (Front and Rear)
- System Interconnect LED Indicators
- System Attention LED Indicators
- System Activity LED Indicators
- Hot-Plug SCSI Hard Drive LED Indicators
- Power Supply LED Indicators
- Hot-Plug Fan LED Indicators
- PCI Hot Plug LED Indicators
- Memory Cartridge LED Indicators
- DIMM Status LED Indicators
- Chapter 8: Physical, Operating, and Performance Specifications
- Index
Power and Media Module Removal and Replacement Procedures
6. Push in the levers on the power and media module (1), as shown in Figure 5-1.
7. Pull the power and media module out of the chassis (2) until it encounters the module
stop latches.
Figure 5-1: Opening the power and media module
8. Press in on the module stop latches (1) and pull the module out of the chassis (2), as
shown in Figure 5-2.
Figure 5-2: Removing the power and media module
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal
system components to cool before touching them.
HP ProLiant DL740 Server Maintenance and Service Guide 5-3
HP CONFIDENTIAL Codename: Jethro Part Number: 270853-004 Last Saved On: 2/10/04 3:51 PM