ProLiant DL740 Server Maintenance and Service Guide
Table Of Contents
- HP ProLiant DL740 Server Maintenance and Service Guide
- Notice
- Contents
- About This Guide
- Chapter 1: Illustrated Parts Catalog
- Chapter 2: Service Preparation
- Chapter 3: Chassis Components Removal and Replacement Procedures
- Chapter 4: Host Module Removal and Replacement Procedures
- Chapter 5: Power and Media Module Removal and Replacement Procedures
- Chapter 6: Diagnostic Tools
- Chapter 7: Connectors, Switches, and LED Indicators
- Connectors
- System Board
- Switches
- LED Indicators
- System Power LED Switch
- Unit Identification LED Switches (Front and Rear)
- System Interconnect LED Indicators
- System Attention LED Indicators
- System Activity LED Indicators
- Hot-Plug SCSI Hard Drive LED Indicators
- Power Supply LED Indicators
- Hot-Plug Fan LED Indicators
- PCI Hot Plug LED Indicators
- Memory Cartridge LED Indicators
- DIMM Status LED Indicators
- Chapter 8: Physical, Operating, and Performance Specifications
- Index
Host Module Removal and Replacement Procedures
4-16 HP ProLiant DL740 Server Maintenance and Service Guide
HP CONFIDENTIAL Codename: Jethro Part Number: 270853-004 Last Saved On: 2/13/04 10:40 AM
PCI Hot Plug Utility
SmartStart software provides the PCI Hot Plug Utility for each operating system supported by
the server. The PCI Hot Plug Utility is delivered as part of the HP Support Pack, which is
available on the SmartStart CD and at the website:
www.hp.com/servers/proliant/manage
The PCI Hot Plug Utility is the user interface of the PCI Hot Plug architecture. The
application performs the following functions:
• Slot control
• PCI Hot Plug option configuration
• Expansion board status monitoring and reporting
For more information, refer to the SmartStart documentation.