ProLiant DL740 Server Maintenance and Service Guide
Table Of Contents
- HP ProLiant DL740 Server Maintenance and Service Guide
- Notice
- Contents
- About This Guide
- Chapter 1: Illustrated Parts Catalog
- Chapter 2: Service Preparation
- Chapter 3: Chassis Components Removal and Replacement Procedures
- Chapter 4: Host Module Removal and Replacement Procedures
- Chapter 5: Power and Media Module Removal and Replacement Procedures
- Chapter 6: Diagnostic Tools
- Chapter 7: Connectors, Switches, and LED Indicators
- Connectors
- System Board
- Switches
- LED Indicators
- System Power LED Switch
- Unit Identification LED Switches (Front and Rear)
- System Interconnect LED Indicators
- System Attention LED Indicators
- System Activity LED Indicators
- Hot-Plug SCSI Hard Drive LED Indicators
- Power Supply LED Indicators
- Hot-Plug Fan LED Indicators
- PCI Hot Plug LED Indicators
- Memory Cartridge LED Indicators
- DIMM Status LED Indicators
- Chapter 8: Physical, Operating, and Performance Specifications
- Index

Physical, Operating, and Performance Specifications
Server Specifications
Table 8-1: HP ProLiant DL740 Server Specifications
Dimensions
Height
30.5 cm (12.0 in)
Depth
68.5 cm (27.0 in)
Width
44.5 cm (17.5 in)
Weight (no drives and two power supplies)
56.7 kg (125 lb)
Input Requirements (per power supply) Low Range/High Range
Rated Input Voltage
100 to 120 V/200 to 240 V
Rated Input Frequency
50 to 60 Hz/50 to 60 Hz
Rated Input Current
8 A/10 A
Power Supply Output Power (per power supply) Low Range/High Range
Rated Steady-State Power
800 W/1150 W
Maximum Peak Power
800 W/1150 W
Temperature Range
Operating
10
° to 35° C* (50° to 95° F)
Shipping
-30
° to 60° C (-22° to 122° F)
Relative Humidity (noncondensing)
Operating
10% to 90%/10% to 90%
Nonoperating
5% to 90%/5% to 90%
Maximum Wet Bulb Temperature
38.7
° C (101.7° F)
* Altitude derating:
o
C/1000 ft to 10,000 feet
8-2 HP ProLiant DL740 Server Maintenance and Service Guide
HP CONFIDENTIAL Codename: Jethro Part Number: 270853-004 Last Saved On: 2/10/04 3:56 PM










