ProLiant DL580 Generation 3 Server User Guide

Troubleshooting 161
Server fault indications flowchart
Symptoms:
• Server boots, but a fault event is reported by Insight Management agents (on
page 134
)
• Server boots, but the internal health LED or external health LED is red or
amber
NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item Refer to
1 "Management agents (on page 134)"
2 • "Integrated Management Log (on page 137)"
• "Event List Error Messages"
3 Server user guide or setup and installation guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
4 System Management Homepage at https://localhost:2381
(https://localhost:2381
)
5 "Power-on problems ("Power-on problems flowchart" on page 154)"
6 • "Hard drive problems"
• Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
7 " HP Insight Diagnostics (on page 136)"