ProLiant DL580 Generation 3 Server Maintenance and Service Guide
Table Of Contents
- HP ProLiant DL580 Generation 3 Server Maintenance and Service Guide
- Notice
- Contents
- Illustrated parts catalog
- Removal and replacement procedures
- Required tools
- Safety considerations
- Preparation procedures
- Removing the front bezel
- Removing a media drive blank
- Removing a media drive
- Removing the processor module
- Removing a processor
- Removing a PPM
- Removing a PCI latch
- Removing a PCI retaining clip
- Removing the PCI-X Hot Plug basket
- Removing a non-hot-plug expansion board
- Removing the PCI-X Hot Plug mezzanine option
- Removing the PCI Express mezzanine option
- Recovering data from the BBWC
- Removing the BBWC battery pack
- Removing the BBWC cache module
- Removing the system board
- Removing the system battery
- Removing the media board
- Removing the SCSI backplane
- Removing the power backplane
- Removing the memory backplane
- Removing a hard drive blank
- Removing a hot-plug SCSI hard drive
- Removing a hot-plug SAS hard drive
- Removing the SAS-SATA hard drive cage
- Removing the SAS-SATA backplane
- Removing a PCI-X Hot Plug expansion board
- Removing a power supply blank
- Removing a redundant hot-plug power supply
- Replacing hot-plug fans
- Memory overview
- Diagnostic tools
- SmartStart software
- SmartStart Scripting Toolkit
- HP Instant Support Enterprise Edition
- Option ROM Configuration for Arrays
- HP ROM-Based Setup Utility
- ROMPaq utility
- System Online ROM flash component utility
- Integrated Management Log
- Integrated Lights-Out technology
- Automatic Server Recovery
- HP Systems Insight Manager
- HP Insight Diagnostics
- USB support
- Troubleshooting the system using port 85 codes
- Server component identification
- Front panel components
- Front panel LEDs and buttons
- Memory board components and LEDs
- Processor module LEDs
- Rear panel components
- Rear panel LEDs and buttons
- Power supply LEDs
- System board components
- DIMM slot locations
- SCSI IDs
- Hot-plug SCSI hard drive LEDs
- Hot-plug SCSI hard drive LED combinations
- SATA or SAS IDs
- SATA or SAS hard drive LEDs
- SAS and SATA hard drive LED combinations
- Fan locations
- Hot-plug fan LEDs
- BBWC LEDs
- Server cabling
- Specifications
- Acronyms and abbreviations
- Index
Illustrated parts catalog 8
System components
Item Description
Original
assembly part
number
Modified
assembly part
number
Original
spare part
number
Modified
spare part
number
Customer self
repair
—
System
components
— — — — —
1
Power supply,
910–1300 W
337867-
001‡ See
requirement
337867-501
364360-
001‡ See
requirement
406421-001 Yes
2 System cage — — — — —
3
Fan 120 mm, hot-
plug
364517-001 — 374552-001 — Yes
— Boards — — — — —
4
PCI-X Hot Plug
switch
011077-
001‡ See
requirement
011077-501
230981-
001‡ See
requirement
411796-001 Yes
5
Memory
backplane,
ProLiant DL580
G3 Server
012101-
001‡ See
requirement
012101-501
376471-
001‡ See
requirement
412327-001 Yes
6
System board,
ProLiant DL580
G3 Server
012092-
001‡ See
requirement
012092-501
376468-
001‡ See
requirement
412324-001 No
7
SCSI backplane,
ProLiant DL580
G3 Server
012104-
001‡ See
requirement
012104-501
376474-
001‡ See
requirement
412328-001 Yes