ProLiant DL580 Generation 3 Server Maintenance and Service Guide
Table Of Contents
- HP ProLiant DL580 Generation 3 Server Maintenance and Service Guide
- Notice
- Contents
- Illustrated parts catalog
- Removal and replacement procedures
- Required tools
- Safety considerations
- Preparation procedures
- Removing the front bezel
- Removing a media drive blank
- Removing a media drive
- Removing the processor module
- Removing a processor
- Removing a PPM
- Removing a PCI latch
- Removing a PCI retaining clip
- Removing the PCI-X Hot Plug basket
- Removing a non-hot-plug expansion board
- Removing the PCI-X Hot Plug mezzanine option
- Removing the PCI Express mezzanine option
- Recovering data from the BBWC
- Removing the BBWC battery pack
- Removing the BBWC cache module
- Removing the system board
- Removing the system battery
- Removing the media board
- Removing the SCSI backplane
- Removing the power backplane
- Removing the memory backplane
- Removing a hard drive blank
- Removing a hot-plug SCSI hard drive
- Removing a hot-plug SAS hard drive
- Removing the SAS-SATA hard drive cage
- Removing the SAS-SATA backplane
- Removing a PCI-X Hot Plug expansion board
- Removing a power supply blank
- Removing a redundant hot-plug power supply
- Replacing hot-plug fans
- Memory overview
- Diagnostic tools
- SmartStart software
- SmartStart Scripting Toolkit
- HP Instant Support Enterprise Edition
- Option ROM Configuration for Arrays
- HP ROM-Based Setup Utility
- ROMPaq utility
- System Online ROM flash component utility
- Integrated Management Log
- Integrated Lights-Out technology
- Automatic Server Recovery
- HP Systems Insight Manager
- HP Insight Diagnostics
- USB support
- Troubleshooting the system using port 85 codes
- Server component identification
- Front panel components
- Front panel LEDs and buttons
- Memory board components and LEDs
- Processor module LEDs
- Rear panel components
- Rear panel LEDs and buttons
- Power supply LEDs
- System board components
- DIMM slot locations
- SCSI IDs
- Hot-plug SCSI hard drive LEDs
- Hot-plug SCSI hard drive LED combinations
- SATA or SAS IDs
- SATA or SAS hard drive LEDs
- SAS and SATA hard drive LED combinations
- Fan locations
- Hot-plug fan LEDs
- BBWC LEDs
- Server cabling
- Specifications
- Acronyms and abbreviations
- Index

Illustrated parts catalog 7
Item Description
Original
assembly part
number
Modified
assembly
part
number
Original spare
part number
Modified
spare part
number
Customer
self repair
—
Hardware kit, ProLiant
DL580 G3 Server *
— — 385642-001 — Yes
1
a) Blank, power
supply
366450-002 — — — Yes
2
b) Blank,
CD/DVD/diskette
377569-001 — — — Yes
3
c) Blank, memory
board
374278-001 — — — Yes
4
Bezel, ProLiant DL580
G3 Server
367600-001 — 376481-001 — Yes
5
Cover, top, ProLiant
DL580 G3 Server
367572-001 — 376480-001 — Yes
6 Blank, hard drive 302531-002 — 122759-001 — Yes
7 Plastics kit — — 376479-001 — Yes
8
a) Guide, PCA, short
(2) *
367597-001 — — — Yes
9
b) Guide, PCA, tall (2)
*
367939-001 — — — Yes
10
c) Latch, PCI, carbon
(2) *
228194-001 — — — Yes
11
d) Latch, PCA, blue
(2) *
228194-002 — — — Yes
12
e) Retainer, card
guide, carbon (2) *
379046-001 — — — Yes
13
f) Retainer, card
guide, blue (2) *
379046-002 — — — Yes
14
Return kit, ProLiant
DL580 G3 Server *
— — 378336-001 — Yes
15 Tool, Torx, T-15* 107473-001 — 199630-001 — Yes
* not shown
‡REQUIREMENT:
For Customers in the EU only.
The use of the Original Spare part is regulated by RoHS legislation§.
If your unit contains a part that is labelled with the Modified Spare number, the Modified Spare must be ordered as
the replacement part in the EU.
If your unit contains a part that is labelled with the Original Spare number, please order the Original Spare as the
replacement part in the EU. In this case either the Original Spare or the Modified Spare may be shipped which will
not affect performance or functionality of the unit.
§Directive 2002/95/EC restricts the use of lead, mercury, cadmium, hexavalent chromium, PBBs and PBDEs in
electronic products.










