ProLiant DL580 Generation 3 Server Maintenance and Service Guide
Table Of Contents
- HP ProLiant DL580 Generation 3 Server Maintenance and Service Guide
- Notice
- Contents
- Illustrated parts catalog
- Removal and replacement procedures
- Required tools
- Safety considerations
- Preparation procedures
- Removing the front bezel
- Removing a media drive blank
- Removing a media drive
- Removing the processor module
- Removing a processor
- Removing a PPM
- Removing a PCI latch
- Removing a PCI retaining clip
- Removing the PCI-X Hot Plug basket
- Removing a non-hot-plug expansion board
- Removing the PCI-X Hot Plug mezzanine option
- Removing the PCI Express mezzanine option
- Recovering data from the BBWC
- Removing the BBWC battery pack
- Removing the BBWC cache module
- Removing the system board
- Removing the system battery
- Removing the media board
- Removing the SCSI backplane
- Removing the power backplane
- Removing the memory backplane
- Removing a hard drive blank
- Removing a hot-plug SCSI hard drive
- Removing a hot-plug SAS hard drive
- Removing the SAS-SATA hard drive cage
- Removing the SAS-SATA backplane
- Removing a PCI-X Hot Plug expansion board
- Removing a power supply blank
- Removing a redundant hot-plug power supply
- Replacing hot-plug fans
- Memory overview
- Diagnostic tools
- SmartStart software
- SmartStart Scripting Toolkit
- HP Instant Support Enterprise Edition
- Option ROM Configuration for Arrays
- HP ROM-Based Setup Utility
- ROMPaq utility
- System Online ROM flash component utility
- Integrated Management Log
- Integrated Lights-Out technology
- Automatic Server Recovery
- HP Systems Insight Manager
- HP Insight Diagnostics
- USB support
- Troubleshooting the system using port 85 codes
- Server component identification
- Front panel components
- Front panel LEDs and buttons
- Memory board components and LEDs
- Processor module LEDs
- Rear panel components
- Rear panel LEDs and buttons
- Power supply LEDs
- System board components
- DIMM slot locations
- SCSI IDs
- Hot-plug SCSI hard drive LEDs
- Hot-plug SCSI hard drive LED combinations
- SATA or SAS IDs
- SATA or SAS hard drive LEDs
- SAS and SATA hard drive LED combinations
- Fan locations
- Hot-plug fan LEDs
- BBWC LEDs
- Server cabling
- Specifications
- Acronyms and abbreviations
- Index
Index 103
Integrated Management Log (IML) 62
internal components 76, 77, 78, 80, 85, 87
L
LED, power button 69
LEDs 68, 69, 70, 72, 75, 82, 84, 87
LEDs, cache module 87
LEDs, hard drive 82, 84
LEDs, memory board 70
M
management tools 60
mechanical components 6
media board 37
media drive 8, 19
media drive blank 6, 19
memory backplane 8, 39
memory boards 50, 56, 57, 70
memory overview 50
memory, Advanced ECC 51
memory, configuration requirements 50
memory, configuring 50, 55
memory, mirrored 53
memory, online spare 52
memory, RAID 50, 54
memory, single- and dual-rank DIMMs 50, 51
memory-related port 85 codes 66
miscellaneous port 85 codes 66
N
network interface controller (NIC) 99
NIC (network interface controller) 99
NIC connectors 73, 74
O
Online ROM Flash Component Utility 62
online spare memory 50, 52
Option ROM Configuration for Arrays (ORCA) 61
ORCA (Option ROM Configuration for Arrays) 61
overtemperature LED 82
P
PCI Express x4 mezzanine 30, 73, 74
PCI retaining clip 27
PCI slot release lever 26
PCI slots 73, 74
PCI-X basket 28
PCI-X Hot Plug mezzanine 29, 73, 74
PCI-X Hot Plug mezzanine cabling 89
plastics kit 8
port 85 code, expansion board-related 65
port 85 code, list 64
port 85 code, memory-related 66
port 85 code, miscellaneous 66
port 85 code, processor-related 64
port 85 code, troubleshooting 64
port 85 code, viewing 64, 78, 80
power backplane 8, 39
power button cabling 94
power button/LED board 94
power requirements 97
power supplies 48, 97
power supply blank 6, 48
power supply LEDs 75
power supply output 97
powering down 16
PPM (Processor Power Module) 8, 25
PPM failure LEDs 72, 78, 82
preparation procedures 14
processor failure LEDs 72, 78
processor module 6, 20, 22, 25
Processor Power Module (PPM) 8, 25
processor zone fans 85
processor-related port 85 codes 64
processors 8, 22
Q
QuickFind diagnostic LEDs 78
R
RBSU (ROM-Based Setup Utility) 55, 61
rear components 73, 74
rear panel connectors 73, 74
rear panel LEDs 75
remote support and analysis tools 61
removal and replacement procedures 13
removing server from rack 16
RILOE II cabling 90
ROM, updating 62
ROM-Based Setup Utility (RBSU) 55, 61
ROMPaq utility 62
S
safety considerations 14
SAS backplane 46
SAS hard drive LEDs 84
SATA backplane 46










