power distribution solutions for the ProLiant DL580 G2 server

ProLiant DL580

G2 server power

requirements

In the standard single-processor configuration, the ProLiant DL580 G2 server includes

one 800-watt power supply that can operate off high or low AC power. Multi--processor

configurations are shipped with two, fully redundant power supplies. Single power

supply units can be upgraded to a dual-power supply configuration with a redundant

power supply option kit. The power supplies are hot-pluggable, allowing powered-up

removal and replacement.

The ProLiant DL580 G2 server uses an IEC C20-type AC plug that requires a power

cable with an IEC C19 receptacle at one end. Power cord kits that are compatible with

the physical and electrical requirements of the DL580 G2 are available from HP and

listed later in this document.

The ProLiant DL580 G2 server power specifications are provided in the following table

using values derived from the product specification as well as the Power Calculator utility

with a unit in the nominal and maximum configurations.

table 2. ProLiant DL580 G2 server power specifications

input voltage

100 115 208 220 230 240

power supply rated output (W) 800 800 800 800 800 800

nom. input wattage (W) 677 658 632 632 632 628

max. input wattage (W) 940 913 877 877 877 865

nom. input current draw (A) 7.1 6.0 3.1 2.9 2.8 2.7

max. input current draw (A) 9.9 8.4 4.3 4.1 3.9 3.7

nom. input (VA) 713 693 645 645 645 636

max. input (VA) 989 962 895 895 895 883

max. thermal (BTU/Hr) 3204 3115 2990 2990 2990 2951

efficiency (%) 70 72 75 75 75 76

power factor 0.95 0.95 0.98 0.98 0.98 0.98

mom. leakage current (mA) 0.43 0.50 0.90 0.96 1.00 1.04

max. leakage current (mA) 0.87 1.00 1.81 1.91 2.00 2.09

nom inrush current (A) @ 20 ms 25 25 25 25 25 25

max inrush current (A) @ 20 ms 50 50 50 50 50 50

NOTES:

Nom. = Nominal rating of a unit operating w/ one or two processors, up to 4 DIMMs, and up

to three PCI cards.

Max. = Maximum rating of a fully loaded unit: 4 processors, 16 DIMMs, 6 PCI cards, and

2 power supplies.

These values are derived from a combination of product specifications and the Power Calculator

configured as above in “Nom” and “Max.”