ProLiant DL580 Setup and Installation Guide

Installing the Server 4-15
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant DL580 Server Setup and Installation Guide Comments:
Part Number: 159213-003 File Name: e-ch4 Installing the Server.doc Last Saved On: 4/5/01 2:26 PM
Figure 4-4. Removing the server rail from the bracket rail
3. Set aside the server rails. You will attach them to the rack server chassis
later in the section, “Attaching Server Rails to the Server.”
Figure 4-5. Separated bracket rail with inner sliding piece (top) and server rail
(bottom)
4. The bracket rail consists of a fixed outer rail that screws to the rack
mounting bracket and an inner slide on a steel ball bearing movement.
This inner slide does not detach.