ProLiant DL580 Setup and Installation Guide

Installing the Server 4-13
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant DL580 Server Setup and Installation Guide Comments:
Part Number: 159213-003 File Name: e-ch4 Installing the Server.doc Last Saved On: 4/5/01 2:26 PM
Additional Tools and Materials
In addition to these supplied items, you may need:
■ Torx T-15 screwdriver
■ Phillips screwdriver
■ Cage nut fitting tool
■ Pencil
■ Optional components
Attaching Rack Mounting Hardware
Each pair of rack mounting brackets, with attached slide rail assemblies,
supports one rack model server.
Figure 4-2. Rack mounting brackets with alignment tabs identifying front
flanges
Each slide rail assembly consists of an outer bracket rail and an inner server
rail. These pieces are attached separately: the bracket rails attach to the rack
mounting brackets, and the server rails attach to the sides of the server chassis.