ProLiant DL580 Setup and Installation Guide

Installing Hardware Options 2-29
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant DL580 Server Setup and Installation Guide Comments:
Part Number: 159213-003 File Name: c-ch2 Installing Hardware Options.doc Last Saved On: 4/9/01 5:07 PM
CAUTION: Leaving a SCSI hard drive bay unpopulated interferes with proper
airflow. Ensure that there is either a hard drive or a blank installed in each bay.
Hot-Plug Power Supplies
Locating and Installing Hot-Plug Power Supplies
Use the following figure and table to locate the hot-plug power supply to be
accessed.
IMPORTANT: Whenever power is first applied to a power supply, there is up to a
ten-second delay before booting begins.
1
2
Figure 2-19. Hot-plug power supply locations
Table 2-5
Hot-Plug Power Supply Locations
Item Component
Hot-plug power supply 2 (redundant)
Hot-plug power supply 1 (primary, populated)
IMPORTANT: If you are using only one power supply, it must be installed in power supply
bay 1 (primary).