ProLiant DL580 Setup and Installation Guide

2-2 Compaq ProLiant DL580 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant DL580 Server Setup and Installation Guide Comments:
Part Number: 159213-003 File Name: c-ch2 Installing Hardware Options.doc Last Saved On: 4/9/01 5:07 PM
For information about upgrading your Compaq ProLiant DL580 server and
obtaining the hot-plug and non-hot-plug options mentioned in this setup and
installation guide, contact your Compaq authorized reseller or visit Compaq
online:
www.compaq.com/products/servers
WARNING: To reduce the risk of personal injury or damage to the equipment,
Compaq recommends that only trained and qualified personnel install non
hot-plug components. In particular, personnel should be trained to deal with
products capable of producing hazardous energy levels.
Non-Hot-Plug Server Areas
■ System board
■ PCI expansion slots (2)
■ Processor slots (4)
■ Memory board
■ Memory DIMM slots (16)
Hot-Plug Server Areas
■ SCSI hard drive bays (4)
■ Power supply bays (2)
■ PCI Hot Plug expansion slots (4)
■ Dual-fan assemblies (4)
NOTE: PCI Hot Plug slot 5 is populated with the system network interface controller (NIC)
card.