ProLiant DL580 Setup and Installation Guide

D-10 Compaq ProLiant DL580 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant DL580 Server Setup and Installation Guide Comments:
Part Number: 159213-003 File Name: l-appd LED Indicators.doc Last Saved On: 4/5/01 2:37 PM
Table D-7
PCI Hot Plug LED Status Indicators
LED Power Status OK to Open Slot Status
Green
Amber
On
Off
No Power is currently applied to the slot. Do NOT open
the slot release lever. The slot is functioning
normally.
Green
Amber
On
On
No Power is currently applied to this slot, but the slot
needs ATTENTION for possible problems with the
slot, board, or driver. Do NOT open the slot release
lever. Follow these steps:
1. Through the PCI Hot Plug application, turn
power Off to the slot (the green LED turns Off).
2. Open the slot release lever (the amber LED
turns Off).
3. Remove or replace the board.
4. Connect the cables to the PCI board.
5. Close the slot release lever.
6. Return power to the slot through the
PCI Hot Plug application (the green LED turns
On).
Green
Amber
Flashing
On
No Power slot is being turned Off or On, which may
take several minutes. There may be a problem
with the slot, the PCI board, or the driver. DO NOT
open the slot release lever until the green LED is
completely Off.
Green
Amber
Off
On
No Power to this slot is turned Off, but this slot needs
ATTENTION. There may be a problem with the slot,
board, or driver.
1. Open the slot release lever (the amber LED
turns Off).
2. Remove or replace the board.
3. Connect the cables to the PCI board.
4. Close the slot release lever.
5. Return power to the slot through the
PCI Hot Plug application (the green LED turns
On).
continued