ProLiant DL580 Setup and Installation Guide

1-2 Compaq ProLiant DL580 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant DL580 Server Setup and Installation Guide Comments:
Part Number: 159213-003 File Name: b-ch1 Server Features.doc Last Saved On: 4/9/01 5:05 PM
System Features
The Compaq ProLiant DL580 server combines enhanced performance and
optimal rack density with maximum availability and manageability. Features
include:
■ Intel Pentium III Xeon processor (100-MHz front side bus) with support
for up to four processors
■ 64-bit I/O technology (66/33 MHz)
■ Integrated Smart Array Controller
■ PC100 ECC SDRAM
■ Wide Ultra2/Wide Ultra3-ready drive cage
■ Compaq NC 3134 Dual Channel 10/100 MB Network Interface
Controller (NIC) card
■ 4U form factor (7 in)
Compaq ProLiant DL580 servers are designed with features and options to
protect against hardware failure or data errors that can result in downtime or
critical data loss. Maximum availability and manageability features include:
■ PCI Hot Plug slots
■ Hot-plug Wide Ultra2 SCSI or Wide Ultra3 SCSI hard drives
■ Hot-plug system fans
■ Hot-plug power supplies and support for optional hot-plug power
supplies
■ Error checking and correcting (ECC) SDRAM memory
■ Redundant NIC support
■ Compaq Automatic Server Recovery-2 (ASR-2)
■ Compaq SmartStart
■ Compaq Remote Insight Manager
■ Disk Drive Fault Tolerance
■ Compaq Pre-Failure Warranty on all Compaq hard drives, processors,
and memory
■ Compaq Remote Insight Lights-Out Edition management support
■ Support for optional Compaq Smart Array controllers