ProLiant DL580 Setup and Installation Guide

7-24 Compaq ProLiant DL580 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant DL580 Server Setup and Installation Guide Comments:
Part Number: 159213-003 File Name: h-ch7 Server Configuration and Utilities.doc Last Saved On: 4/5/01 2:48 PM
Diagnostics and Other Utilities
Selecting the Diagnostics and Utilities feature from the System Configuration
Utility menu prompts the system to test, inspect, upgrade, and diagnose the
server.
The Compaq ProLiant DL580 server maintains the diagnostics and other
utilities in the system partition on the hard drive, and accesses these utilities
when a system configuration error is detected during the POST.
After configuring the server, run the INSPECT Utility to obtain detailed
information about the server’s hardware configuration.
For instructions on using the Diagnostics Utility and other Compaq utilities,
refer to the Compaq website:
www.compaq.com
Exit from This Utility
To exit from the System Configuration Utility, select Exit from the main
menu. Restart the server if you are prompted to do so.