ProLiant DL580 Setup and Installation Guide

7-14 Compaq ProLiant DL580 Server Setup and Installation Guide
Compaq Confidential Need to Know Required
Writer: Cynthia Dresden Project: Compaq ProLiant DL580 Server Setup and Installation Guide Comments:
Part Number: 159213-003 File Name: h-ch7 Server Configuration and Utilities.doc Last Saved On: 4/5/01 2:48 PM
Installing an Operating System
Compaq ProLiant DL580 servers support the following operating systems
(OS):
Novell NetWare 4.2 and 5.1
Microsoft Windows NT 4.0
Microsoft Windows 2000 Server and Advanced Server
SCO OpenServer 5.04 and 5.05
SCO UnixWare 7.1
IBM OS/2 Warp Server 4.0 and Warp Server Advanced 4.0
Sun Solaris 2.6 for Intel Platforms and Sun Solaris 7 for Intel Platforms
Use the SmartStart CD to assist with installing the operating system with
vendor supplied media. Select the Assisted Installation option after starting the
SmartStart CD. Drivers are located on the SmartStart CD.
IMPORTANT: Always check README FIRST or HELP files on the SmartStart CD.
If present, these files may contain information about important software updates.
Novell NetWare Device Drivers from Compaq
To operate NetWare, your Compaq ProLiant DL580 server must maintain
certain device drivers, located on the SmartStart CD shipped with the server. If
you use SmartStart to install the operating system, these drivers are installed
automatically. Otherwise, you can use SmartStart to create Support Software
for Novell Products (NSSD) diskettes to support a manual installation of
Novell products.
To perform the manual installation of the Novell NetWare Device Drivers, or
installation without SmartStart, execute the following procedure:
1. Launch the SmartStart CD as described previously in this chapter.
2. Launch manual the operating system configuration:
a. Select the System Configuration Utility.
b. Select the Operating System Installation option from the System
Configuration Utility main menu.
3. Follow the instructions provided for the operating system you are
installing.