Compaq Parallel Database Cluster Model PDC/O2000 for Oracle8i and Windows 2000 Administrator Guide

6-28 Compaq Parallel Database Cluster Model PDC/O2000 for Oracle8i and Windows 2000 Administrator Guide
Compaq Confidential – Need to Know Required
Writer: John Blackburn Project: Compaq Parallel Database Cluster Model PDC/O2000 for Oracle8i and Windows 2000 Administrator Guide Comments:
Part Number: 225082-002 File Name: g-ch6 Cluster Management.doc Last Saved On: 6/13/01 10:29 AM
Note that Secure Path Manager client is not required to be running in order for
Secure Path to protect path availability. The RaiDisk device driver running on
cluster nodes handles Secure Path’s protection capability.
Refer to the Secure Path documentation for descriptions of the icons used to
indicate changes in path and controller status.
Identifying I/O Path and Array Controller
Failures
The icons and other information in the Secure Path Manager views can help
you identify the source of I/O path and array controller failures. See the Secure
Path documentation for detailed descriptions of the procedures for performing
these activities.
Uninstalling Secure Path
To remove Secure Path software from your cluster, perform these steps from
each cluster node:
1. Open the Control Panel and choose Add/Remove Programs.
2. Select SecurepathClient for Windows 2000 on RAID Array
4000/4100 v3.1 and click Change/Remove.
3. Click OK in the resulting window.
4. Select Securepath Server for Windows 2000 on RAID Array
4000/4100 v 3.1 and click Change/Remove.
NOTE: The version numbers displayed here are subject to change.
5. Click OK in the resulting window.
6. Click YES to stop the Secure Path Agent so that the uninstall can
proceed properly.
7. Restart the node.
8. Repeat steps 1 through 7 for all other nodes in the cluster.
NOTE: To aid in the reinstallation of Secure Path, the file “client.ini” is not removed.
The uninstallation process is complete.