HP ProLiant DL560 Server High Density Deployment

hp ProLiant DL560 server high-density deployment white paper
12
To use the Rack/Site Preparation utility:
1. Select either the Express or Advanced mode of calculation.
– Express calculation uses pre-set values for components and can be
used for producing a quick estimate of system requirements.
– Advanced calculation requires the user to configure individual
components and is recommended for final installation planning.
If Express mode is selected, proceed to step 5.
2. Select the DL560 tab at the bottom of the screen. The individual
component configuration page is displayed.
figure 3: opening screen of individual component calculator
3. Starting with the line voltage, select the configuration parameters
desired, scrolling down to ensure all appropriate parameters are
chosen. Be aware of error messages indicating possible problems.
4. When component configuration is complete, click on the Rack Site
Installation tab to return to the main calculator page (figure 2).
5. Complete the Load Requirements and Input Line Voltage configuration
areas. Each configuration change will be calculated instantly. The rack
space indicator indicates the amount of vertical space used/available.