HP ProLiant DL385 Generation 5 Server Maintenance and Service Guide

Removal and replacement procedures 61
4.
Remove the expansion slot cover.
To replace the component, reverse the removal procedure.
Expansion slot covers (3, 4, and 5)
To remove the component:
1. Power down the server (on page 28).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 27, "Remove
the server from the rack" on page 29).
3. Remove the access panel ("Access panel" on page 30).
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser cage.
4. Disconnect any internal or external cables connected to any existing expansion boards.
5. Remove the PCI riser cage ("PCI riser cage" on page 60).