HP ProLiant DL385 Generation 5 Server Maintenance and Service Guide

Removal and replacement procedures 59
5.
Remove the hard drive backplane.
To replace the component, reverse the removal procedure.
Hard drive backplane retainer
To remove the component:
1. Power down the server (on page 28).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 27, "Remove
the server from the rack" on page 29).
3. Remove the access panel ("Access panel" on page 30).
4. Remove all hot-plug hard drives ("Hot-plug SAS hard drive" on page 31).
5. Remove the hard drive backplane ("Hard drive backplane" on page 58).
6. Remove the hard drive backplane retainer.