HP ProLiant DL385 Generation 5 Server Maintenance and Service Guide

Removal and replacement procedures 42

Remove the processor fan bracket.

6. Remove all hot-plug fans from the processor fan bracket ("Hot-plug fan" on page 36).

To replace the component, reverse the removal steps and press down on the top of each fan to be sure it

is seated properly.

Front bezel

To remove the component:

1. Power down the server (on page 28).

2. Extend or remove the server from the rack ("Extend the server from the rack" on page 27, "Remove

the server from the rack" on page 29).

3. Remove the access panel ("Access panel" on page 30).

4. Remove the air baffle ("Air baffle" on page 40).

IMPORTANT: For this procedure, you do not need to remove the hot-plug fans from the

processor fan bracket. When reinstalling the processor fan bracket, press the top of each fan

to be sure it seats securely.

5. Remove the processor fan bracket ("Processor fan bracket" on page 41).