HP ProLiant DL385 Generation 5 Server Maintenance and Service Guide

Removal and replacement procedures 39
5.
Remove the cache module.
To replace the component, reverse the removal procedure.
CAUTION: To prevent damage to the cache module during installation, be sure the cache
module is fully inserted before pressing down.
Removing the battery pack
To remove the component:
1. Power down the server (on page 28).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 27, "Remove
the server from the rack" on page 29).
3. Remove the access panel ("Access panel" on page 30).
4. Disconnect the cable, and then remove the battery pack.