HP ProLiant DL385 Generation 2 Server Maintenance and Service Guide

Removal and replacement procedures 70
16.
Open the processor retaining latch and the processor socket retaining bracket.
17. Using your fingers, remove the failed processor.
CAUTION: To avoid damage to the system board:
• Do not touch the socket contacts.
• Always install the processor socket cover after removing the processor from the socket.
• Do not tilt or slide the processor when removing the processor from the socket.
CAUTION: To avoid damage to the processor:
• Handle the processor only by the edges.
• Do not touch the bottom of the processor, especially the contact area.
18. Remove the PPMs ("PPM" on page 48).
19. Disconnect all cables connected to the system board.