HP ProLiant DL385 Generation 2 Server Maintenance and Service Guide

Removal and replacement procedures 64
To replace the component, reverse the removal procedure.
Expansion slot covers (3, 4, and 5)
To remove the component:
1. Power down the server (on page 29).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 28, "Remove
the server from the rack" on page 30).
3. Remove the access panel ("Access panel" on page 31).
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser cage.
4. Disconnect any internal or external cables connected to any existing expansion boards.
5. Remove the PCI riser cage ("PCI riser cage" on page 62).
6. Remove the expansion slot cover.
To replace the component, reverse the removal procedure.
Expansion slot cover retainer (slots 1 and 2)
To remove the component:
1. Power down the server (on page 29).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 28, "Remove
the server from the rack" on page 30).
3. Remove the access panel ("Access panel" on page 31).
4. Open the expansion slot cover retainer.