HP ProLiant DL385 Generation 2 Server Maintenance and Service Guide

Removal and replacement procedures 61
6.
Remove the power supply backplane.
To replace the component, reverse the removal procedure.
Hard drive backplane
To remove the component:
1. Power down the server (on page 29).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 28, "Remove
the server from the rack" on page 30).
3. Remove the access panel ("Access panel" on page 31).
4. Remove all hot-plug hard drives ("Hot-plug SAS hard drive" on page 32).
5. Remove the hard drive backplane.
To replace the component, reverse the removal procedure.