HP ProLiant DL385 Generation 2 Server Maintenance and Service Guide

Removal and replacement procedures 58
8.
Close and lock the heatsink retaining latches.
9. Install the air baffle.
10. Install the access panel ("Access panel" on page 31).
11. Install the server into the rack.
12. Power up the server.
DIMMs
To remove the component:
1. Power down the server (on page 29).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 28, "Remove
the server from the rack" on page 30).
3. Remove the access panel ("Access panel" on page 31).
4. Remove the air baffle ("Air baffle" on page 41).