HP ProLiant DL385 Generation 2 Server Maintenance and Service Guide

Specifications 105
BTUs per hour 3344 at 100V to 120V AC
input
3277 at 200V to 240V AC
input
Power supply output
Rated steady-state power 800 W at 100V AC input
850 W at 120V AC input
1000 W at 200V to 240V AC
input
Maximum peak power 800 W at 100V AC input
850 W at 120V AC input
1000 W at 200V to 240V AC
input
Hot-plug power supply calculations
For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, refer to the HP Enterprise Configurator website (http://h30099.www3.hp.com/configurator/
).
DDR2 SDRAM DIMM specifications
CAUTION: Be sure to install DIMMs in the proper configuration. Refer to the Documentation
CD.
Specification Value
Size 512 MB, 1 GB, 2 GB
Width 72 bits
Upgrade requirement * Any combination of like-paired DDR2 DIMMs that provide
a minimum of 512 MB
*Use only 512-MB, 1-GB, or 2-GB, 72-bit wide, 1.8-V, PC2-5300 Unbuffered ECC DDR2 DIMMs. Use HP DDR2
DIMMs only.
1.44-MB diskette drive specifications
Specification Value
Dimensions
Height 12.7 mm (0.5 in)
Width 96 mm (3.8 in)
Depth 130 mm (5.1 in)
LEDs (front panel) Green = On
Read/write capacity per
diskette
High density 1.44 MB